12m Min Trapezoidal Roof Tile Roll Forming Machine For Construction

The 840 roof panel forming machine can produce roof panels with different appearances according to production needs. The formed panels rolled by this machine have flat appearance, uniform corrugation, high utilization, high strength, high production automation, low cost, and durability. , And the yield is high. 840 roof slab pressing machine is suitable for large and medium-sized enterprises and civil buildings, such as factory buildings, hangars, hangars, stadiums, exhibition halls, theaters, etc.

Key points for placement of 840 roof tile press:

(1) For the convenience of operation and maintenance, please be more than 50cm away from the wall

(2) Then precision adjustment: the machine frame must be adjusted horizontally to maintain precision

(3) Secondly, the following matters are important for the installation of the foundation: A strength must be able to randomize the weight of the machine B foundation ground must be level

(4) Installation of color steel tile equipment (refer to instructions)

(5) There must be a place with good power supply afterwards

What is the Technical Parameters?

• WHY CHOOOSE US

1. Resistant to frost, heat,hail and gales; 100% waterproof, due to the lateral run-off channel on each

sheet for several models.
2. High-solid forming stand guarantees the goods and uniform high quality of final productd
3. Precise forming, The operation automatically minimizes the tolerance of cutting length
4. A stylish and attractive design, giving the apperance of a traditional roof tile.
5.The raw material can be in different color, with elegant and noble looking.